Product Introduction
The PDC diamond drill bit is equipped with an annular plate that slides in the axial direction of the drill bit, and the annular plate is equipped with several sets of fixed rods and rotating rods, and the fixed rods and rotating rods are equipped with splines for controlling the second external gear ring located inside the drill bit to drive the rotation of specific spherical drilling teeth, and this PDC diamond drill bit can convert the working surface by rotating the spherical drilling teeth when the composite piece on the spherical drilling teeth falls off, so that it is not necessary to replace the spherical drilling teeth immediately, and the work efficiency can be greatly improved.
Product Advantage
1. In the special stratum which is not suitable for the lower salvage tool can choose this kind of follow drill bit to salvage the composite piece dropped by the last drill bit.
2. Less drilling up and down times.
3. Shorten the working period and improve the drilling efficiency.
Product Uses
1. Scenario: Drilling in Special Geological Conditions
Description: In certain geological conditions where traditional drilling methods may encounter challenges, our PDC bit provides a reliable solution. With its advanced design and cutting-edge technology, our PDC bit is specifically engineered to handle these special geological formations. Whether it is drilling through hard rock formations, abrasive formations, or interbedded formations, our PDC bit excels in delivering exceptional performance and durability. Its specialized cutting structure and high-quality materials ensure efficient drilling operations, reducing the need for frequent tripping in and out of the wellbore. By utilizing our PDC bit, operators can overcome challenging geological conditions with ease, resulting in improved drilling efficiency and reduced operational costs.
2. Scenario: Expedited Drilling Operations
Description: When faced with strict project deadlines or the need for accelerated drilling operations, our PDC bit proves to be the ideal choice. Designed to enhance drilling efficiency and reduce drilling time, our PDC bit allows operators to expedite the drilling process without compromising on performance or quality. Its innovative design incorporates advanced cutting elements and optimized hydraulics, ensuring efficient cuttings removal and reduced torque and drag. This enables operators to achieve higher penetration rates, significantly reducing the number of trips required for drilling operations. By utilizing our PDC bit, operators can effectively meet tight project timelines, maximize productivity, and achieve cost-effective drilling operations.
FAQ
1. Can the downhole motor be customized according to specific requirements?
- Yes, our downhole motors can be customized to meet your specific needs. Please provide us with the details of your requirements, and we will work with you to develop a tailored solution.
2. What is the typical delivery time for the downhole motor?
- The delivery time for our downhole motors varies depending on the order volume and customization requirements. Please contact our sales team for an accurate estimate of the delivery time for your specific order.
3. Are there any additional charges for customizing the downhole motor?
- Yes, there may be additional charges for customizing the downhole motor. The cost will depend on the extent of customization required. Our sales team can provide you with a detailed quote including any customization charges.
4. Can you provide technical support for the downhole motor?
- Yes, we offer comprehensive technical support for our downhole motors. Our team of experts is available to assist you with any technical queries or issues you may encounter. Feel free to reach out to our support team for assistance.
5. What are the advantages of using your downhole motor in oil drilling operations?
- Our downhole motor offers several advantages in oil drilling operations. It provides high torque and power output, allowing for efficient drilling in various formations. Additionally, its robust design ensures durability and longevity, reducing downtime and maintenance costs.
Product Introduction
The PDC diamond drill bit is equipped with an annular plate that slides in the axial direction of the drill bit, and the annular plate is equipped with several sets of fixed rods and rotating rods, and the fixed rods and rotating rods are equipped with splines for controlling the second external gear ring located inside the drill bit to drive the rotation of specific spherical drilling teeth, and this PDC diamond drill bit can convert the working surface by rotating the spherical drilling teeth when the composite piece on the spherical drilling teeth falls off, so that it is not necessary to replace the spherical drilling teeth immediately, and the work efficiency can be greatly improved.
Product Advantage
1. In the special stratum which is not suitable for the lower salvage tool can choose this kind of follow drill bit to salvage the composite piece dropped by the last drill bit.
2. Less drilling up and down times.
3. Shorten the working period and improve the drilling efficiency.
Product Uses
1. Scenario: Drilling in Special Geological Conditions
Description: In certain geological conditions where traditional drilling methods may encounter challenges, our PDC bit provides a reliable solution. With its advanced design and cutting-edge technology, our PDC bit is specifically engineered to handle these special geological formations. Whether it is drilling through hard rock formations, abrasive formations, or interbedded formations, our PDC bit excels in delivering exceptional performance and durability. Its specialized cutting structure and high-quality materials ensure efficient drilling operations, reducing the need for frequent tripping in and out of the wellbore. By utilizing our PDC bit, operators can overcome challenging geological conditions with ease, resulting in improved drilling efficiency and reduced operational costs.
2. Scenario: Expedited Drilling Operations
Description: When faced with strict project deadlines or the need for accelerated drilling operations, our PDC bit proves to be the ideal choice. Designed to enhance drilling efficiency and reduce drilling time, our PDC bit allows operators to expedite the drilling process without compromising on performance or quality. Its innovative design incorporates advanced cutting elements and optimized hydraulics, ensuring efficient cuttings removal and reduced torque and drag. This enables operators to achieve higher penetration rates, significantly reducing the number of trips required for drilling operations. By utilizing our PDC bit, operators can effectively meet tight project timelines, maximize productivity, and achieve cost-effective drilling operations.
FAQ
1. Can the downhole motor be customized according to specific requirements?
- Yes, our downhole motors can be customized to meet your specific needs. Please provide us with the details of your requirements, and we will work with you to develop a tailored solution.
2. What is the typical delivery time for the downhole motor?
- The delivery time for our downhole motors varies depending on the order volume and customization requirements. Please contact our sales team for an accurate estimate of the delivery time for your specific order.
3. Are there any additional charges for customizing the downhole motor?
- Yes, there may be additional charges for customizing the downhole motor. The cost will depend on the extent of customization required. Our sales team can provide you with a detailed quote including any customization charges.
4. Can you provide technical support for the downhole motor?
- Yes, we offer comprehensive technical support for our downhole motors. Our team of experts is available to assist you with any technical queries or issues you may encounter. Feel free to reach out to our support team for assistance.
5. What are the advantages of using your downhole motor in oil drilling operations?
- Our downhole motor offers several advantages in oil drilling operations. It provides high torque and power output, allowing for efficient drilling in various formations. Additionally, its robust design ensures durability and longevity, reducing downtime and maintenance costs.
Bit type | 10-3/4" SS1605DFX |
|
lADC Code | S425 | |
Number of Blades | 6 | |
Cutter Size(mm) | Φ15.88MM; Φ13.44MM | |
Cutter Qty | Φ15.88x24; Φ13.44x49 | |
Nozzle Qty | 9NZ TFA | |
Gauge protector length (mm) | 100mm | |
Connector | 6-5/8"API REG | |
N.W/G.W.(KG) | 110/130KG | |
Nozzle Size(inch) | 5/8x5; 9/16x4 |
Bit type | 10-3/4" SS1605DFX |
|
lADC Code | S425 | |
Number of Blades | 6 | |
Cutter Size(mm) | Φ15.88MM; Φ13.44MM | |
Cutter Qty | Φ15.88x24; Φ13.44x49 | |
Nozzle Qty | 9NZ TFA | |
Gauge protector length (mm) | 100mm | |
Connector | 6-5/8"API REG | |
N.W/G.W.(KG) | 110/130KG | |
Nozzle Size(inch) | 5/8x5; 9/16x4 |